2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 209Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 209

7Remove the air filter (see Section 2)8Remove the vacuum hose and the fuel-pump-to-carburetor hose CD803 12Remove the E-clip
foot peg and footwell to the footrest; then remove the footwell 10Remove the springs securing the muffler to the exhaust
pipe; then remove the mufflerAccount for two exhaust springs 15Loosen the clamp securing the air intake duct to the air filter
housing 11Remove the cap screws securing the exhaust pipe to the head; then remove the exhaust pipe 16Disconnect the crankcase