2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 215Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 215

14Using the Piston Pin Puller, remove the piston pinAccount for the opposite-side circlipRemove the pistonNOTE: It is advisable
and the crankshaft is rotated, severe damage will result ! CAUTION When removing the cylinder, be sure to support the piston
to prevent damage to the crankcase and piston NOTE: If the existing rings will not be replaced with new rings, note the location
of each ring for proper installationWhen replacing with new rings, replace as complete set onlyIf the piston rings must be
removed, remove them in this sequence 13Using an awl, remove one piston-pin circlip AStarting with the top ring, slide one