2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 224Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 224

ATV-1024 CInstall the compression rings (1 and 2) so the letter on the top surface of each ring faces the dome of the pistonRotate
not force the cylinder or damage to the piston, rings, cylinder, or crankshaft assembly may occur ! CAUTION Incorrect installation
of the piston rings will result in engine damage 1Install the piston on the connecting rod making sure there is circlip on
each side and the open end of the circlip faces upwardsNOTE: The piston should be installed so the arrow points toward the
exhaust 4Loosely install the two nuts which secure the cylinder to the crankcaseNOTE: The two cylinder-to-crankcase nuts
will be tightened in step 10CC032D 2Place the two alignment pins into positionPlace the cylinder gasket into position; then