2009 Polaris Outlaw 450/525 Service Manual, Page 221Get this manual

2009 Polaris Outlaw 450/525 Service Manual, Page 221

General information on servicing the transmission Clamp the transmission shaft in vise (use protective jaws)If continuing
not overstretch the lock rings when mounting Assembling the main shaft Clamp the main shaft in the vise (use protective jaws)
Carefully oil all parts before mounting Mount the split needle bearing 2, mount the 5-speed idler gear with the recess for
the shift dogs facing up Mount the stop disk (22.6x30x1.5mm) with the sharp edge facing up and mount the lock ring Slip on
the 3rd gear sliding gear with the shift groove facing up and mount the lock ring Slip on the stop disk (22.6x30x1.5 mm)
with the sharp edge facing down and the split needle bearing Slip on the 4th gear sliding gear with the shift dogs facing