2009 Polaris Outlaw 450/525 Service Manual, Page 231Get this manual

2009 Polaris Outlaw 450/525 Service Manual, Page 231

6-6 Mounting the oil pump Wipe the contact area on the oil pump cover clean Insert the needle roller in the oil pump shaft
Slip on the oil pump gear 3, mount the stop disk and lock washer Check the oil pump for smooth operation by turning the oil
pump gear Wipe the contact area on the oil pump cover clean Insert the oiled inner and outer rotors in the engine caseNOTE:
mount the inner and outer rotors with marks and facing the case Mount the needle roller Fill the oil pump housing with engine
oil Degrease the screw threads (M5x16) and apply Loctite 222Screw on the oil pump cover and tighten to Nm Check the oil pump