2009 Polaris Outlaw 450/525 Service Manual, Page 234Get this manual

2009 Polaris Outlaw 450/525 Service Manual, Page 234

6-9 Mounting the timing gear Make sure the woodruff key is fully seated in the crankshaft Heat the timing gear and slip it
(M6x25) and apply Loctite 243Screw on the timing chain guide and tensioning rail and tighten the screws to NmRemember to
mount the bushings The fastening points are not used for this model Mounting the piston and cylinder Mount new cylinder base
gasket Oil the piston pin boss in the conrod and the piston pin CAUTION ARROW ON THE BOTTOM OF THE PISTON MUST POINT IN THE