2009 Polaris Outlaw 450/525 Service Manual, Page 235Get this manual

2009 Polaris Outlaw 450/525 Service Manual, Page 235

6-10 ! CAUTION THE ! OIL SCRAPER RING BE ESPECIALLY CAREFUL WHEN MOUNTING THE CYLINDER! BREAKS EASILY Oil the piston and
the timing chain, making sure both ends are the same length NOTE: If timing chain is being reused, install in direction indicated
by the arrow you placed on the chain upon disassemblyNOTE: insert in cable tie in the two ends of the timing chain to handle
and position the timing chain (see illustration) Degrease the screw threads (M5x16) and apply Loctite 243Screw on the clip
and tighten to Nm Oil the collar screws at the thread and under the head and mount with the washers Tighten the collar screws
in crosswise direction as follows: 1st step: tighten until you start to feel resistance 2nd step: tighten the screws to 40