2009 Polaris Outlaw 450/525 Service Manual, Page 236Get this manual

2009 Polaris Outlaw 450/525 Service Manual, Page 236

6-11 Place the camshaft in the cylinder head Make sure the washer is fully seated The drain bore in the gasket carrier must
decompression bolt firmly attached to the camshaft gear must be on topNOTE: when mounting the camshaft, lock the crankshaft
in the TDC position with the engine locking screw Place the timing chain on the camshaft gear and mount new rivet link First
mount the bit for special tool PA-48686 as shown and lock the rivet link Use channel lock pliers to start the master link