2009 Polaris Outlaw 450/525 Service Manual, Page 239Get this manual

2009 Polaris Outlaw 450/525 Service Manual, Page 239

6-14 Mounting the flywheel Remove the engine locking screwScrew in the plug with new copper seal ring and tighten to 10 Nm
and collar nut, hold with clutch holder while you tighten the collar nut to 60 Nm Mounting the pulse generator and ignition
cover Degrease the screw threads (M5x16) and apply Loctite 243Screw on the pulse generator and tighten to Nm Degrease the