2009 Polaris Outlaw 450/525 Service Manual, Page 240Get this manual

2009 Polaris Outlaw 450/525 Service Manual, Page 240

6-15 Mounting the clutch NOTE: change the engine oil any time the clutch is damaged Oil all the lining disks prior to mounting
the screw threads and apply Loctite 243Mount the pressure capScrew on the clutch springs and spring retainers in crosswise
direction and tighten to Nm Mount both dowels and the needle roller 7Grease all shaft seal rings in the clutch coverMount
the clutch cover gasketPour approx30 ml engine oil into the hole in the crankshaft NOTE: make sure the oil jet in the engine