2009 Polaris Outlaw 450/525 Service Manual, Page 246Get this manual

2009 Polaris Outlaw 450/525 Service Manual, Page 246

Remove the screws from the accelerator pump cover and take off the accelerator pump cover Take the seal rings 1, spring
in; count and write down the number of turns Unscrew the mixture control screw and remove together with the spring, washer
and O-ringNOTE: the spring, washer and O-ring usually stay in the boreThese parts can be removed with the help of compressed
airThe mixture control screw bl should not be open more than turnsIf more than two turns are required (richer mixture) you