2009 Polaris Outlaw 450/525 Service Manual, Page 252Get this manual

2009 Polaris Outlaw 450/525 Service Manual, Page 252

8-10 example Adjusting the position of the throttle sensor NOTE: the following measurement must be made at component temperature
the variable throttle sensor resistance (Rvar) for the throttle sensor setting example Rges (blueblack)- (setpoint value)
Rvar (yellowblack) (tolerance 0,05 k)Rges 0,17 blue blue yellow yellow black black Connect the multimeter (measuring range
k) to the yellow (+) and black (-) cables on the throttle sensor and measure the variable throttle sensor resistance (Rvar)
If the measured value does not correspond to the calculated setpoint value, loosen the screw and adjust the setpoint value