2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 23Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 23

MAINTENANCE TRANSMISSION GEARSHIFT LINKAGE ADJUSTMENT, PRELIMINARY INSPECTION Linkage rod will rotate 18 -14 turn if rod
for contact of shift lever to shifter opening in the front fenderEnsure shift linkage or shift lever is not contacting the
frame or exhaust componentsTighten shift linkage rod end jam nuts properly after adjustmentYou should be able to rotate the
linkage rod between 18 and 14 turn after both jam nuts are tightThe transmission shift linkage should be periodically inspected
for wear and parts replaced as required to remove excess play from shift linkageRefer to Transmission chapter for more information