2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 31Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 31

MAINTENANCE SEALED LOW MAINTENANCE BATTERY INSPECTION REMOVAL The battery is located under the seat and right rear fender
the battery, install the negative cable last3Remove the battery and recharge according to the charge chart4Clean battery
cables and terminals with stiff wire brushCorrosion can be removed using solution of one cup water and one tablespoon baking
sodaRinse well with clean water and dry thoroughly5Reinstall battery, attaching positive (+) (red) cable first and then the
negative (-) (black) cable6Coat terminals and bolt threads with Dielectric Grease (PN 2871329)7Reinstall battery cover and
holder strap 4Clean with electrical contact cleaner or glass bead spark plug cleaner onlyCAUTION: wire brush or coated abrasive
should not be used5Measure gap with wire gaugeRefer to specifications for proper spark plug type and gapAdjust gap if necessary
by bending the side electrode carefully Spark Plug Gap .036 (.9 mm) 6If necessary, replace spark plug with proper typeCAUTION: