2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 44Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 44

MAINTENANCE the machine is one foot higher than the rearSet the hand brake and block the wheelsMake sure the machine is in
(PN 2870990)Parking Brake Lock Minimum Thickness Pads should be changed when friction material is worn to 364 (.1 cm), or
about the thickness of dime HOSEFITTING INSPECTION Check brake system hoses and fittings for cracks, deterioration, abrasion,
and leaksTighten any loose fittings and replace any worn or damaged parts Sight Glass AUXILIARY BRAKE ADJUSTMENT (HYDRAULIC)
Use the following procedure to inspect the hydraulic auxiliary (foot) brake system and adjust or bleed if necessary: First,
check foot brake effectiveness by applying 50 lb(approx downward force on the pedalThe top of the pedal should be at least
inch, (25.4mm) above the surface of the footrest Rear Master Cylinder Reservoir 18, to 14, Free Play 50 lbs Check brake system