2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 45Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 45

MAINTENANCE If less than one inch, two things must be examined: Free Play: Free play of the brake pedal should be 1814 inch
the specificationReplace the chain if the length exceeds the wear limit3When replacing or reinstalling drive chain, install
the closed end of the splice link clip as shown, with the closed end leading in forward operation DRIVE CHAIN AND SPROCKET
INSPECTION Polaris ATV drive chains are equipped with O-ring sealed permanently greased pins and rollersThe sprockets and
outer rollers require periodic lubricationLubricate the chain with Polaris O-Ring Chain Lubricant (PN 2872073)Inspect the
drive chain for missing or damaged O-Rings, link plates, or rollersDo not wash the chain with high pressure washer, gasoline
or solvents; do not use wire brush to clean the chain as damage to the O-Rings may occurClean chain with hot soapy water
and soft bristled nylon brushNever allow battery acid to contact the drive chain Proper Splicelink Clip Opening Position