2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 61Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 61

OIL PRESSURE TEST EH50PL 1Remove blind plug on front left cylinder head2Insert 18 NPT oil pressure gauge adaptor into the
allows oil to bypass the filter elementAt this point, the oil is diverted in two directionsOil is supplied to the camshaft
through the left front cylinder stud, and an oil passage in the headOil enters the camshaft through the PTO (L) journalThe
camshaft journals, cam lobes, and rocker arms are lubricated through holes in the camshaftThe oil lubricates the cam chain
and sprocket and drains to the sumpThe other oil path from the filter leads through delivery pipe to the crankcase main oil
gallery, which leads to the stator plate oil passageHere it passes through the slotted friction bearing (located in the stator
plate) into the crankshaftAn oil seal on the stator plate prevents oil from entering the statorflywheel areaOil travels through
the crankshaft to the crank pin, lubricating the connecting rod large end bearing directlyOil also passes through an oil