2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 64Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 64

ENGINE DISASSEMBLY REFER TO PAGE 3.7 FOR ENGINE REMOVALINSTALLATION NOTES should have clearance at this point CAM CHAIN TENSIONERROCKER
Marks To position crankshaft at Top Dead Center (TDC) on compression stroke: 2Rotate engine slowly in the direction of rotation
watching intake valves open and start to close3Continue to rotate engine slowly, watching camshaft sprocket marks and the
mark in the timing inspection hole 4Align single (TDC) mark on flywheel with projection in inspection hole, and the cam sprocket