2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 69Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 69

ENGINE 3Measure height of each cam lobe using micrometerCompare to specificationsJournal O.D CYLINDER HEAD REMOVAL 1Remove
Journal I.D MagPTO End: 1.4963-1.4970 (38.005-38.025 mm) 3Remove bolts (B) and tap cylinder head lightly with plastic hammer
until looseCAUTION: Tap only in reinforced areas or on thick parts of cylinder head casting to avoid damaging the thread4Remove
cylinder head and head gasket Calculate oil clearance by subtracting journal OD from journal bore IDCompare to specificationsCamshaft