2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 78Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 78

ENGINE 3Loosen hose clamps and remove coolant inlet hose4Remove the two mm cylinder base bolts PISTON REMOVAL 5Loosen each
piston circlip and push piston pin out of pistonIf necessary, heat the crown of the piston slightly with propane torchCAUTION:
Do not apply heat to the piston ringsThe ring may lose radial tension 6Tap cylinder lightly with plastic hammer in the reinforced