2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 93Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 93

ENGINE 4Ensure that the split between the puller legs is fully supported by the main body of the tool (Ill 4)Hex Socket Screws
Tighten 1Install the Woodruff key, drive sprocket, and slotted nutTighten the nut to the specified torqueSlotted Nut Torque:
35-51 ftlbs(47-69 Nm) Ill6 6Turn the puller T-Handle clockwise until it contacts the water pump shaftContinue rotating until
the remaining portion of mechanical seal has been removed from the casesIll6 Pump shaft oil seal can also be replaced at