2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 101Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 101

OIL PIPES Install the oil pipes with new sealing washersTighten all bolts evenly to specified torqueOil Pipe Bolt Torque:
friction plateNOTEInformation only2009 models not equipped REMOVE BOLTS AND RECOIL HOUSING NOTEInformation only2009 models
not equipped 13Remove ratchet pawl with spring and inspectReplace spring or ratchet pawl if worn, broken, or damagedNOTE:
Long arm of spring engages reelShort end against pawl10Pull recoil rope so it is extended approximately 12-18 Check handle
c-ring for proper tension, and the handle for cracks or damage which may allow water or dirt to enter the recoil housing
through the ropeNOTE: The handle must seal tightly on the recoil housing to prevent water from entering14Hold reel firmly