2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 115Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 115

FUEL SYSTEMCARBURETION 5Install the pilot mixture screw, spring, washer, and O-ring as an assemblyLubricate the O-Ring with
the float tongue will rest lightly on the inlet needle valve pin without compressing the spring 2Measure the height from
the float bowl mating surface to the top of step in float as shownBoth sides of float should be parallel to each otherThe
measurement should be made at the mid-point on the top of the float using Float Adjustment Tool (PN 2872314) or vernier caliperWhen
measuring the height be sure the inlet needle valve spring is not compressed3If adjustment is necessary, bend the tongue
slightlyBe sure float measurement is even on left and right sideFloat arms even Bend to adjust float Float Height: Std: BST