2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 126Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 126

BODYSTEERINGSUSPENSION CONCENTRIC SWING ARM REMOVAL (2) Washer (1) Nut (8) Pivot Bolt (7) Pivot Bushing, Left (6) (4) Pivot
1Lift rear of machine and support securely with wheels off the floor2Remove drive chain3Remove rear caliperCAUTION: Do not
allow the caliper to hang by the brake lineBrake line damage may result4Remove rear wheels andor hubs and Pivot bolt retainers
(8)5Loosen both swingarm pivot bolts (5 and 8) and then remove both bolts while supporting swingarm 6Remove lower shock bolt7Remove
swingarm8Remove LH pivot bushing (7) and swingarm bushing (6) from swingarm9Place flats of right side pivot bushing (4) in