2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 130Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 130

BODYSTEERINGSUSPENSION FRONT STRUT CARTRIDGE REPLACEMENT REFER TO ILLUSTRATION ON PAGE 5.8 1Hold strut rod and remove top
assemblyRemove coil spring and collapse strut cartridgeRemove two pinch bolts from strut castingRemove strut cartridgeInstall
cartridge until bottomed in strut castingInstall pinch bolts with wire clamp(s)Torque pinch bolts to 15 ftlbs(21 Nm)9Reassemble
spring and top pivot assemblyBe sure all parts are installed properly and seated fully10Torque strut rod nut to specificationDo
not over torque nut345678 Strut Rod Nut Torque 15 ftlbs(21 Nm) 5Remove castle nut (B) and separate A-arm (C) from ball joint