2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 131Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 131

BODYSTEERINGSUSPENSION Apply grease to extension cap and threads of puller bolt to ease removalG Thread bolt (D) with nut
joint (E) into driver (F)G F Slide ball jointdriver assembly into guideG Drive new joint into strut housing until fully seated9Apply
Loctite 242 (PN 2871949) to threads of retaining plate screws or install new screws with pre-applied locking agentTorque
screws to ftlbs(11 Nm)10Install A-arm on ball joint and torque castle nut to 25 ftlbs(35 Nm)11Reinstall cotter pin with open