2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 132Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 132

BODYSTEERINGSUSPENSION STEERING POST ASSEMBLY 12 ftlbs(16 Nm) 12 ftlbs(16 Nm) NOTE: Steering post bearing is shown in exploded
tip is recommended) Keep the torch moving to prevent damage2Apply the decal on one edge firstSlowly lay down remainder of
the decal while rubbing lightly over the decal surface to eliminate any air bubbles during the application The following
procedure involves the use of an open flamePerform this procedure in well ventilated area, away from gasoline or other flammable
materialsBe sure the area to be flame treated is clean and free of gasoline or flammable residueThe side panels, front and
rear fender cabs are plastic polyethylene materialTherefore, they must be "flame treated" prior to installing decal to ensure