2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 143Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 143

CLUTCHING DRIVE CLUTCH DISASSEMBLY Inspect shaft "X" Mark 4Inspect area on shaft where bushing rides for wear, galling, nicks,
Cover Bushing Inspection: Replace the cover bushing if more brass than Teflon is visible on the bushingRefer to bushing replacement
in this chapter3Inspect cover bushing (A)The outer cover bushing is manufactured with Teflon coatingBushing wear is determined
by the amount of Teflon remaining on the bushing Clutch Holding Fixture: (PN 2871358) Spider Removal Tool: (PN 2870341) 1Install
clutch in holding fixture and loosen the spider (counterclockwise) using spider removal toolNOTE: It is important that the