2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 144Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 144

CLUTCHING Moveable Sheave Bushing Inspection 2Inspect the Teflon coating on the moveable sheave bushingthe new pin during
to the bushings1Reassemble drive clutch in the following sequenceBe sure the "X", or the marks that were made earlier, are
aligned during each phase of assembly) a)"X", or the marks that were made earlier, on cover b) spider, making sure spacer
washers are installed underneath spider and positioned properly in recess 1Inspect all rollers, bushings and roller pins
by pulling flat metal rod across the rollerTurn roller with your fingerIf you notice resistance, galling, or flat spots,
replace rollers, pins and thrust washers in sets of threeAlso inspect to see if roller and bushing are separatingBushing
must fit tightly in rollerUse the Roller Pin Tool (PN 2870910) to replace rollers and pinsTake care not to damage roller