2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 145Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 145

CLUTCHING c) "X", or the marks that were made earlier, under weight Spacer washers 2Install moveable sheave onto fixed sheave3Install
damage to the stationary sheaveRefer to Page 6.2 for torque specificationCAUTION: Be sure the spider spacer washers are fully
seated in the recessed area in the spiderAny misalignment will alter clutch balanceInverting the clutch while initially tightening
the spider will help position the washersSpider Torque: 200 ftlbs(276 Nm) Cover Screw Torque: 90 inlbs(10.4 Nm) 8Reinstall
cover, aligning bosses on the tower and coverTorque cover bolts evenly to specification DRIVE BELT TENSION Straight Edge