2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 150Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 150

CLUTCHING 6Turn sheave and puller barrel together counterclockwise on puller rod until bushing is removed7Remove nut from
the Main Puller Adapter (#8) (PN 5020632) onto the Piston Pin Puller (PN 2870386) 3Insert the Clutch Bushing Installation
Tool (#2) (PN 5020628) into center of sheave and with towers pointing away from vise, slide sheave onto puller rod4Install
nut on puller rod and hand tightenTurn barrel to apply additional tension if needed 2From outside of clutch cover, insert
the Drive Cover Bushing Remover (#3) (PN 5020629) into cover bushing3With inside of cover toward vise, slide cover onto puller4Install
nut onto puller rod and hand tightenTurn puller barrel to increase tension as needed5Turn sheave and barrel together counterclockwise