2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 151Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 151

CLUTCHING 5Turn clutch cover counterclockwise on puller rod until bushing is removed6Remove nut from puller rod and set aside7Remove
on puller rod until bushing is seated5Remove nut from puller rod and take installation tool and clutch cover off rod DRIVEN
CLUTCH DISASSEMBLYINSPECTION 1Apply Loctite 680 (PN 2870584) to the back side of new bushingWorking from inside of cover,
insert bushing and bushing installation tool into center of clutch coverBushing (PN 3576510) Loctite 680 (PN 2870584) Used