2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 152Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 152

CLUTCHING 6Inspect ramp buttons in the moveable sheave and replace if wornNOTE: The ramp buttons are secured by Torx screws
bushings for wear 3Note the location of the spring and remove helix4Note the location of the spring in the moveable sheave,
and remove the spring5Check alignment of tabs on springReplace the spring if tabs are misaligned or the spring coils are
distorted Moveable Sheave Bushing Inspection: Replace the bushing if more brass than Teflon is visible on the bushingRefer
to bushing replacement in this chapter8Inspect the Teflon coating on the moveable sheave bushing9Inspect driven clutch faces