2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 161Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 161

FINAL DRIVE WHEEL AND HUB TORQUE TABLE Item 4x4 Front Wheel Nuts Rear Wheel Nuts Front Hub Nut Rear Hub Retaining Nut Specification
the lower part of the cam (5), disengaging the clutchThe rollers are held in place by the spring (4)See Ill2The tension of
this spring is critical to AWD hub operationAlways use the correct spring (refer to appropriate parts manual) and use the
Hilliard Clutch Garter Spring Installation Tool (PN 2870888) Refer to exploded views and text for torque values of other
fasteners CAUTION: Locking nuts, and bolts with preapplied locking agent should be replaced if removedThe self-locking properties
of the nut or bolt are reduced or destroyed during removal SPECIAL TOOLS PART NUMBER 2871199 2870888 TOOL DESCRIPTION Seal
Sleeve Installation Tool Kit Hilliard Clutch Garter Spring Installation Tool Roller Pin Removal Tool CV Boot Clamp Pliers
34" Straight Wrench WARNING It is important that the front and rear axle drive ratio and tire size are not changedChanging