2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 164Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 164

FINAL DRIVE 10Reinstall brake caliper assemblyTorque retaining bolts to 18 ftlbs(25 Nm)11Reinstall front wheelsTorque retaining
area 2Remove brake disc attaching bolts and brake discNOTE: If the attaching bolts are difficult to remove, it may be helpful
to heat the outer surfaces of the hub in the area of the disc mounting bolts, to soften the locking agent 4With spring side
of new seal facing toward hub casting, press it in until flush with brake disc mating surfaceCAUTION: Do not use hammer as
damage to the seal will result5Thoroughly clean the brake disc with brake cleanerIt is very important that the brake disc