2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 181Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 181

FINAL DRIVE should still be visible under the axle nut from an angleTorque to 8-10 ft.lbs(1114 Nm) 1619 ft.lbs H NOTE: The
(E), brake disc (F), and axle nut (G) onto the axleF E 8Reinstall the chain and master linkTo verify proper chain tension,
refer to Chapter "DRIVE CHAIN INSPECTION" for this procedure9Torque the eccentric clamp bolts to 35 ft.lbs(47 Nm) 35 ft.lbs5Install
the retaining ring (H) onto the axleIt should fully seat into the groove6Turn the axle nut outward with 34" Wrench (PN 2870772)