2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 191Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 191

TRANSMISSION 5Torque bolts in steps using cross pattern to 18 ftlbs(25 Nm)6Install shift shaft, washer, retaining ring and
position switchApply Loctite 242 (blue) to threads of switch screws and torque to 13-16 inlbs(1.5-1.9 Nm) NOTE: Install bellcrank
on shaft, lining up the marks left at disassembly7Install nut and torque to 12 ftlbs(17 Nm)8Carefully install highreverse
shaft assembly and gear cluster as unit into their respective bearing case areasTap with soft face hammer to seat shaft assembliesNOTE:
Make sure highreverse shift shaft pin is properly positioned within legs of shift fork shaft return springNOTE: After installation,