2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 206Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 206

BRAKES 2Coat piston with clean Polaris DOT Brake Fluid (C)Install piston (D) with twisting motion while pushing inwardPiston
the brake lines to the proper torque of 15 ft.lbs(21 Nm)3Install the adjuster screw and turn until stationary pad contacts
disc, then back off 12 turn Polaris Premium All Season Grease (PN 2871423) 4Compress the mounting bracket and make sure the
dust seals are fully seatedInstall the pads as shown on Page 9.33Clean the disc and pads with brake parts cleaner or denatured
alcohol to remove any dirt, oil or grease 4Follow brake bleeding procedure outlined in this chapter5Install wheels and torque