2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 208Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 208

REAR BRAKE PAD REMOVAL 1Remove the snap ring (B) from the bottom slide pin (A) 5Clean the caliper with brake cleaner or alcohol6Measure
caliper, be careful not to damage brake lineSupport caliper so as not to kink or bend brake line3Loosen or remove the master
cylinder capWith the pads installed, press the piston into the caliper bodyNOTE: Brake fluid will be forced through compensating