2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 209Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 209

REAR BRAKE PAD INSTALLATION 1Insert new brake pads into the caliperNOTE: If pads are greasy, dirty, oily, or fluid soaked
the master cylinder7It is recommended that burnishing procedure be performed after installation of new brake pads to extend
service life and reduce noiseStart machine and slowly increase speed to 30 mphGradually apply brakes to stop machineRepeat
procedure 10 times BRAKE BURNISHING PROCEDURE It is required that burnishing procedure be performed after installation of
new brake pads to extend service life and reduce noise18 ft.lbs(25 Nm) Start machine and slowly increase speed to 30 mphGradually