2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 211Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 211

BRAKES 9Inspect caliper piston bore for scratches, severe corrosion, or galling and replace if necessary Inspect 1618 ft.lbs(2225
with twisting motion to ease assembly until fully seatedSeals 3Install brake pads in caliper body with friction material
facing each otherInstall the slide pins and the slide pin retaining ringTorque the slide pins to 30-35 ft.lbs(41-48 Nm)NOTE:
Torquing the slide pins while the caliper is mounted on the ATV simplifies the torque procedure 3035 ft.lbs(4148 Nm) O-Rings