2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 241Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 241

ELECTRICAL Battery Location SEALED LOW MAINTENANCE BATTERYOCVOPEN CIRCUIT VOLTAGE TEST Battery voltage should be checked
cable first and reinstall the negative cable last! 3Remove the battery SEALED LOW MAINTENANCE BATTERY INSTALLATION 1Clean
battery cables and terminals with stiff wire brushCorrosion can be removed using solution of one cup water and one tablespoon
baking sodaRinse well with clean water and dry thoroughly2Route the cables correctly3Reinstall battery, attaching positive
(+) (red) cable first and then the negative (-) (black) cableCoat terminals and bolt threads with Nyogel Grease (PN 2871329)4Reinstall
the holder strap SEALED LOW MAINTENANCE BATTERY LOAD TEST CAUTION: To prevent shock or component damage, remove spark plug
high tension leads and connect securely to engine ground before proceedingNOTE: This test can only be performed on machines
with electric startersThis test cannot be performed with an engine or starting system that is not working properlyA battery
may indicate full charge condition in the OCV test and the specific gravity test, but still may not have the storage capacity