2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 253Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 253

ELECTRICAL STARTER DRIVE Pinion GearAnti Kick-out Shoe, Garter Spring Replacement If the garter spring is damaged, the overrun
spring grooveMake sure that the spring is positioned between the shoe alignment pins and the back flange of the anti kick-out
shoes2Remove the lock ring, end washer, spring retainers and clutch return springScrew the overrun clutch off the end of
the pinion shaftRemove the old spring and install new oneLightly grease the pinion shaft and reinstall the clutch, spring,
retainers, end washer and lock ring in the reverse orderMake sure the end washer is positioned properly so that it will hold