2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 85Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 85

COOLING SYSTEM 4Drain the coolant from the radiator by removing the coolant hose from the lower right-hand portion of the
to the frame 84Remove the recovery bottle return line from the radiatorRemove Disconnect the fan motorTilt the radiator back
and lift upward to allow the lower grommets to clear the frame support holesRemove the radiator from the vehicle out the
right-hand side through the wheel wellTake care not to damage the cooling fins during removal2nd- Lift Up 10Reverse procedure
for installationWhen installing the recovery bottle, insert the upper portion of the bottle into the shroud first, then push
the lower tab on the bottle into the shroud until it snaps into place1st- Pull Back 11After installation and reassembly,
remove the pressure cap and fill the radiator and recovery bottle with coolant12Refer to the "Cooling System Bleeding Procedure"