2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 89Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 89

COOLING SYSTEM 78Be sure bearing is fully seated in cover after Step 2, or severe crankshaft damage will result3Install new
using seal installerPA-44995-A Install new O-rings on the plastic coolant pipeLubricate the O-rings with P80 (rubber lubricant)
or lithium grease The flywheel contains powerful magnetsUse caution when installing the stator coverDO NOT place fingers
between cover and crankcase at any time during the installation process or injury could result4566Install impellerTorque
bolt to 10 lb-ft(13.5 Nm)Carefully install the stator coverCheck the water pump coupler engagement by turning the impeller