2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 137Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 137

ENGINE 2Visually inspect thrust washerRemove pin and replace washer if damaged or worn to less than 1.15 mm (.045 in1.15-1.35
gearSmall holes (B) must be aligned upon assemblyPlace split gear on drive gear with tabs (B) of split gear toward springs
of drive gear, and holes (C) aligned89Lay new bearing (retaining ring side down) on open press plate so both inner and outer
races are supportedPress shaft assembly into bearing until seated 5Hold gear assembly togetherTurn over on workbenchWorking