2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 166Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 166

TRANSMISSION 15Lift up on the lower shift fork and rotate the end into the cam18Install the oil deflector plate and install
install the transmission cover onto the transmissionApply even pressure to cover while setting into placeA soft-faced hammer
can be used once the cover is started and alignedIMPORTANT: Take care not to damage seals during cover installation24Install
the retaining bolts and torque to specificationLeave (2) bolts out to use later when tightening the coupler 16Install the
upper shift fork and rotate the end into the cam 17Install both rails and springsTransmission Cover Bolts: 15-20 ftlbs(20-27
Nm) 25Install new O-ring onto the compensator shaft prior to installing the transmission coupler Park Shaft Rail Shift Shaft