2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 182Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 182

CLUTCHING (PVT) Belt Inspection 1Inspect belt for hour glassing (extreme circular wear in at least one spot and on both sides
Installation 1If the Belt Removal Tool was removed without the belt installed, you must rotate the clutch and insert the
tool at the o'clock position7 Lower Left-Hand Frame Support Bolts: 36 ftlbs(49 Nm) Install the left rear wheel and torque
wheel nuts to specification Wheel Nuts: Steel: 45 ftlbs(61 Nm) Aluminum: 75 ftlbs(102 Nm) 8Lower the ATV, start the engine,
and test the operation of the PVT systemWith the Belt Removal Tool installed, loop the belt over the drive clutch and over
top of the driven sheaves PVT Break-In (Drive BeltClutches) A proper break-in of the clutches and drive belt will ensure
longer life and better performanceBreak in the clutches and drive belt by operating at slower speeds during the 10 hour break-in
period as recommended (see Chapter "Engine Break-In Period" for break-in example)Pull only light loadsAvoid aggressive acceleration