2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 190Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 190

CLUTCHING (PVT) NOTE: Use Bushing Tool PA-473368Install nut (C) onto end of puller rod and hand tightenTurn puller barrel
as neededTurn clutch cover counterclockwise on puller rod until bushing is removed and cover comes freeRemove nut from puller
rod and set asideRemove bushing and bushing removal tool from pullerDiscard bushingMain Adapter (8) Adapter Reducer (9) Piston
Pin Puller Apply Loctite 609 evenly to bushing bore inside moveable sheaveSet bushing in place on sheaveInsert installation
puller tool (Item AB) with "A" side down, into center of bushingNOTE: Some models use Bushing Tool PA-47336With towers pointing
upward, slide sheave, bushing and tool onto puller rodInstall nut on puller rod and hand tightenTurn barrel to apply additional
tension if neededTurn sheave counterclockwise, making sure bushing is drawn straight into boreContinue until bushing is seatedRemove
nut from puller rod and set asideRemove sheave from puller Cover Bushing Installation 123456Apply Loctite 609 evenly to bushing