2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 195Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 195

CLUTCHING (PVT) Clutch Bushing Removal 12345Install main puller adapter (Item 8) onto pullerInstall adapter reducer (Item
and sheave comes freeRemove nut (C) (left hand thread) from puller rod and set asideRemove adapters from puller8967 Apply
Loctite 609 evenly to bushing bore inside moveable sheaveInstall sheave face down on pullerInstall new bushing on installation
tool (Item 2) and install assembly into sheaveInstall left hand thread nut (C) onto puller rod and hand tighten against installation
toolTurn clutch sheave counterclockwise, making sure bushing is drawn straight into boreContinue until bushing is seatedRemove